Description
Fluent Drive reduces the number of times the robot will drive around itself. This will make the robot less likely to get stuck in wet and muddy conditions. Therefore the robot needs more space around the field. The robot needs about 2 meters/6.56 feet.
Example of robot path for the corner markings on 11v11 Soccer
When Fluent Drive is active the robot will not drive completely fluent, but with small pauses when driving from one line to another. Fluent Drive will, compared to Fluent Run, approximately be 5 minutes slower on an 11v11 soccer field.
Fluent Drive is useful in tough turf conditions, where there is a risk of the robot getting stuck when the fields are e.g. wet and muddy.
The feature is available on the app 9.10.0 and together with robot software 9.12.0.
How to enable Fluent Drive:
1. Enter General Settings
2. Go to Robot Settings: Fluent Drive “Off”
When Fluent Drive is set to “Off” the robot will drive with its normal behavior.
3. Go to Robot Settings: Fluent Drive “On”.
When Fluent Drive is set to “On” the robot will drive with fluent behavior on all layouts.
New layouts will be created with the “Fluent Radius” and use the “Line Run-up: Before line” set from Robot Settings both settings can be adjusted from Advanced Settings. If Line Run-up is not enabled from Advanced Setting the Run-up from Robot Settings will be used.
4. Go to Robot Settings: Fluent Drive “Per Layout”
When Fluent Drive is set to “Per Layout” the robot will only drive with fluent behavior on layouts where it is activated from Advanced Settings.
5. Go to Advanced Settings: Fluent Drive “Per Layout”
Fluent Drive and Line Run-up will be enabled and adjusted from Advanced settings.
